All sizes from 2 to 256 ways
There are no real restrictions on the size or shape of the annunciator so you can specify exactly the configuration you need.
|
Three different windows sizes
You can specify exactly the size that suits your particular working environment.
|
Six different window colours
All colours are catered for in both LEDs and lamps.
LEDs are equally bright and evenly spread across the whole window unlike low-cost bullit LEDs.
This is the clearest possible means of showing alarm information.
|
"No Master Module" design
Unlike all other annunciators the P725 uses a system where each board can be the master controller, there is no central processor or controller.
Hence the reliability and MTBF are far greater.
|
Only 145mm deep
Traditional annunciator systems are up to 400mm deep which means the panel layout is severely restricted to avoid the annunciator hitting other components.
|
5 year guarantee
You can have total peace of mind that if there is a problem the unit is covered by a generous extended warranty - confirmation of our faith in the product.
|
Serial Communications
Can be supplied with RS485 Serial Communications.
This allows alarms to be received into the serial link or received on volt-free contacts and transmitted to computer based systems via the serial output.
|
User Programmable
The flexibility of use is far greater than any other competitor.
Many systems are not programmable at all.
On the P725 every window can be programmed individually to provide the ultimate flexibility.
|
All sequences and functions
Using the programming features the unit can be set to work in exactly the way the operator requires.
All standard ISA sequences are available and can be changed at a moment's notice wherever you are in the world.
It is no longer necessary to change parts and circuit boards at the commissioning stage.
|
Integral Programming Module
Other systems that do have limited programmability have to be setup using DIL switches, this means taking out every single circuit board, setting configurations and replacing.
On the P725 all programming is carried out and checked without removing boards, bezels or backplates.
|
All sequences and functions
Using the programming features the unit can be set to work in exactly the way the operator requires.
All standard ISA sequences are available and can be changed at a moment's notice wherever you are in the world.
It is no longer necessary to change parts and circuit boards at the commissioning stage.
|
Integral Programming Module
Other systems that do have limited programmability have to be setup using DIL switches, this means taking out every single circuit board, setting configurations and replacing.
On the P725 all programming is carried out and checked without removing boards, bezels or backplates.
|
Options
A further range of options is available for different mounting, repeat relays, different response times, different field contact voltages, power supplies etc.
So a complete alarm package can be provided.
|
Local/remote options
A variety of different local and remote configurations can be supplied.
So alarms are received on one unit and transmitted via the serial communications to a remote unit or even multiple units (up to a maximum of 32).
|
Five relay outputs
Five relays are included as standard.
These relays will meet nearly all normal annunciator requirements around the world.
|
CE Certified
Designed to surpass the stringent European EMC and LVD directives, this annunciator is able to work without false triggering in extreme industrial environments.
|
Matching Lamp box
On projects that only require a lamp box there is a matching lamp-only unit that looks exactly the same from the front.
This allows you to mix systems and still look consistent.
|
Opto-isolated inputs
All inputs are opto-isolated to further improve the noise rejection features of the unit.
100,000s of alarm points supplied
Around the world there are a vast number of installed units working day and night reliably in all process and utilities industries.
|
